View all the parameters of your Victron devices with our nGauge Victron VE Direct Bluetooth Dongle. As an added benefit, you are able to set out of bounds alarms for each individual parameter and get an alarm when something is wrong. This can all be done without being physically connected to a Smart Victron device, or without opening the VictronConnect App. And you can have multiple Victron devices and they will be displayed simultaneously.
- The Dongle is compatible with majority of Victron devices with a VE.Direct Port. Can be a Bluetooth or Non Bluetooth version as long as it has a the white small 4 pin VE.Direct Port.
- Preconfigured settings for MPPT, Inverter, Charger and Shunt products
- One meter cable included for optimal placement for better reception, especially when device is installed in a trailer.
| Description | BMV60x | BMV70x | BMV71x SmartShunt | MPPT | Phoenix Inverter | Phoenix Charger |
| Main or Channel 1 (battery) voltage | x | x | x | x | x | x |
| Channel 2 (battery) voltage | x | |||||
| Channel 3 (battery) voltage | x | |||||
| Auxiliary (starter) voltage | x | x | x | |||
| Mid-point voltage of the battery bank | x | x | ||||
| Mid-point deviation of the battery bank | x | x | ||||
| Panel voltage | x | |||||
| Panel power | x | |||||
| Main or Channel 1 (battery) current | x | x | x | x | x | |
| Channel 2 (battery) current | x | |||||
| Channel 3 (battery) current | x | |||||
| Load current | x | |||||
| Load output state (ON/OFF) | x | |||||
| Battery temperature | x | x | ||||
| Instantaneous power | x | x | ||||
| Consumed Amp Hours | x | x | x | |||
| State-of-charge | x | x | x | |||
| Time-to-go | x | x | x | |||
| Alarm condition active | x | x | x | |||
| Relay state | x | x | x | x | x | x |
| Alarm reason | x | x | x | x | ||
| Off reason | x | x | ||||
| Depth of the deepest discharge | x | x | x | |||
| Depth of the last discharge | x | x | x | |||
| Depth of the average discharge | x | x | x | |||
| Number of charge cycles | x | x | x | |||
| Number of full discharges | x | x | x | |||
| Cumulative Amp Hours drawn | x | x | x | |||
| Minimum main (battery) voltage | x | x | x | |||
| Maximum main (battery) voltage | x | x | x | |||
| Number of seconds since last full charge | x | x | x | |||
| Number of automatic synchronizations | x | x | x | |||
| Number of low main voltage alarms | x | x | x | |||
| Number of high main voltage alarms | x | x | x | |||
| Number of low auxiliary voltage alarms | x | |||||
| Number of high auxiliary voltage alarms | x | |||||
| Minimum auxiliary (battery) voltage | x | x | x | |||
| Maximum auxiliary (battery) voltage | x | x | x | |||
| Amount of discharged energy | x | x | ||||
| Amount of charged energy | x | x | ||||
| Yield total (user resettable counter) | x | |||||
| Yield today | x | |||||
| Maximum power today | x | |||||
| Yield yesterday | x | |||||
| Maximum power yesterday | x | |||||
| Error code | x | x | ||||
| State of operation | x | x | x | |||
| Model description (deprecated) | x | x | x | |||
| Firmware version | x | x | x | x | x | |
| Firmware version (24 bit) | x | |||||
| Product ID | x | x | x | x | x | |
| Serial Number | x | x | x | |||
| Day sequence number (0..364) | x | |||||
| Device Mode | x | x | ||||
| AC output voltage | x | |||||
| AC output current | x | |||||
| AC output apparent power | x | |||||
| Warning Reason | x | |||||
| Tracker Operation Mode | x | |||||
| DC Monitor Mode | x |
R499.00
